ind-innerheader

Browse all Industrial Valve products or narrow your results from the top menu.



 

Bronze • Carbon • Stainless • 2-Way • 3-Way NPT • Butt Weld • Socket Weld • Sanitary • Flanged

photo

Pro Valve full port soft seated ball valves. Standard floating ball design, with high cycle stem seals, and equalized pressure cavity hole. With manual, locking handle, electric or pneumatic actuator.

 

download

 

Download coming soon...

Resilient Seated

photo

Pro Valve ANSI 125# design wafer or lugged ductile iron body, EPDM, BUNA-N, Viton, or Polyurethane seats available, with stainless steel disc, U cup advanced stem seal, and extended neck for insulation. With 10-position locking handle, 1/4 turn gear, or electric or pneumatic operator.

 

download

 

Download PDF

Double Off-Set High Performance

photo

Pro Valve ANSI 150# and 300# wafer and lugged carbon or stainless body, RTFE seat with stainless steel disc, high cycle stem seal, and extended neck for insulation. With 10-position locking handle, ¼ turn gear, or electric or pneumatic operator.

 

download

 

Download PDF

Triple Off-Set High Performance

photo

Pro Valve ANSI 150# and 300# lug carbon body, flexible graphite + 316 metal seat for zero leakage, with stainless steel disc, high cycle stem seal, and extended neck for insulation. Manual ¼ turn gear, or electric or pneumatic operator.

 

download

 

Download PDF

Gates, Globes and Swing Check

photo

Pro Valve ANSI 150 and 300# cast carbon or stainless steel flanged body. Standard trim #8 internals, and stellite seats with manual handwheel operator.

 

download

 

Download PDF

Wafer Double Door

photo

Pro Valve ANSI 150# and 300# carbon or stainless body, with 316 stainless steel plates, with Viton or metal seats.

 

 

 

download

 

Download PDF

Resilient / Metal Seated Knife Gate

photo

Pro Valve ANSI 125# semi lug body or ANSI 150# full lug body design, complete with stainless steel gate, PTFE non-asbestos packing, and EPDM, BUNA-N, Viton, or metal to metal seats. With either manual handwheel, manual multi-turn gear, pneumatic cylinder, or electronic actuator.

 

download

 

Download PDF

Electra Actuator

photo

Electra Actuator non-spring return. Standard features include heater, 2-SPDT auxiliary switches, and manual override, with NEMA 4 weatherproof enclosure. Supply voltage available in 24 VAC / VDC, 120 VAC /220 VAC, in either on/off or modulating control.

 

download

 

Download PDF

Pneumatic Actuator

photo

Notus Model HP high pressure quarter turn rack and pinion actuators are available in double acting or spring return design.

 

download

 

Download PDF

Pilot Solenoid

acc-pilot-solenoid

Side mounted NAMUR solenoid valves are available in 24 VAC, 24 VDC, 120 VAC and 220 VAC voltages. General service enclosure or optional explosion proof enclosure, are available with standard manual override capabilities.

 

download

 

Download PDF

Lux Limit Switch

acc-lux-vls.jpg

Lux Limit Switch positition indicators are designed to operate on quarter turn pneumatic actuators. Visual open or closed indication, with 2-SPDT end of travel limit switches that confirm the valves position.

 

download

 

Download PDF

Pneumatic Positioner

ACCPNE.jpg

For proportional control of high pressure pneumatic actuators. Controlled by either 3-15 PSI instrument air or 4-20 ma input signal. Optional 4-20 ma feedback confirms the valves position.

 

download

 

Download PDF

Cycle Timer

acc-rct

Extends the operating time of the Electra on/off actuator by slowly opening and closing the actuator to protect the piping against water hammer.

 

download

 

Download PDF

Log Rate Servo Board

photo

For proportional control of Electra quarter turn actuators. Controlled by either 4-20 ma or 0-10 VDC input signal. Optional 4-20 ma or 0-10 VDC feedback confirms the valves position.

 

download

 

Download PDF

High Resolution Digital Servo Board

photo

Digital high resolution proportional control card achieves 450 points of resolution over 90° with the Electra quarter turn actuator. Controlled by either 4-20 ma or 0-10 VDC input signal. Optional 4-20 ma or 0-10 VDC feedback confirms valves position.

 

download

 

Download PDF

Chainwheel Operators

photo

Babbitt chainwheel operators are available in cast or ductile iron, hammer blow type, solid hub type, and bronze alloy. Accessories include galvanized chain, masterlinks and chainwheel safety equipment.

 

download

 

Download PDF

Manual Gears and Accessories

ACCPNE.jpg

Dynatorque quarter turn and multi-turn gears, handwheels, and stem nut drivers. For manually operating part or multi-turn valves.

 

download

 

Download PDF